Winfarthing is based for the summer in Holyhead this year which means that we have to negotiate one or the other of the above for many passages. We have not been in and out of HH for many years and previously only ever passed the notorious headlands at slack water, calmish conditions. I can read the.. more>>

Hi all, Managed to misplace a lifejacket in the clubhouse last Sunday afternoon (about 3.00 p.m.) - William was wearing it on the way in to the clubhouse but it then disappeared. Anyone who finds they had an unexpected additional red Compass Comfort auto lifejacket with harness in their gear when.. more>>

Having repositioned a panel I need longer M5 bolts to fix the compass. Does anybody know of a source of plastic nuts and bolts in small quantities preferably in black? more>>

I`m about to start applying 5 coats of Gelshield to the stripped back gelcoat on Charlie.Obviously the keels will be coated but is there any need to fully coat other metal items eg propshaft,through-hull exit points etc? The hull will be finished with a coat of primer then 2 x antifoul. And any oth.. more>>

can any one help , I have my new brushes and magnets for my windvane but cant get the thing apart. I have taken the little holding clips out and exposed one side of unit but cant get into the main unit.Any help greatly received. Thanks to advice on how to ask question... Pete [Slyvia]. more>>

Anybody who went on the summer cruise last year or indeed anyone who has reasonably up to date charts of West/ South West Scotland/ Northern Ireland and is not going there this year who would be prepared to loan/ rent or sell second charts to me - I'm open to offers: Planned route Isle of Man - N.. more>>

I removed the prop and the cutter off Chinook at the weekend to remove the barnacle encrusting. I tried scrapping it off with not much success, but I have just discovered alloy wheel cleaner disolves the encrusting rapidly. This is working really well on the prop cutter which is particularly sharp i.. more>>

Hi Everyone, Please can you tell me what you eat on your boat? What things do you have? How much food do you carry? Do you carry enough Gravy to sink the navy? In your quarter masters stores. Sorry couldn’t resist that.. Anyway swiftly moving on. Can you help? more>>

We are looking to go to S Ireland this season, and fancy going straight from somewhere like Porth Dinllaen to Kilmore Quay. Any recommendations for what tide/time to leave? I would rather round Carnsore Point in daylight. Assume average boat speed of 4.5 / 5.5 knots. more>>

Hi - new to the club and Sailing in the Strait. 1) How can you predict the sea state at the Bar when you set off at PD? Given that one always has to leave with an ebbing tide and more often than not SW winds one would mostly end up with wind over tide conditions at the Bar. However, once one is n.. more>>

So does any body dare recommend a type and amp hour rating for a battery in the following scenario. Hunter Sonata 7, no onboard charging, ie. need to take battery off to re-charge, no requirement for starting an engine. Consumption will be limited to VHF and occasional GPS position checks in passag.. more>>

I have a 26ft macwester with bowsprit as reccomended,we have no genoa or jib and would like a new genoa.Can anyone suggest what length foot we should go for-as the macwester is not the quickest boat in the world,but we would like to get as much out of her as possible. more>>

I'm contemplating fitting a feathering prop, specifically a Kiwiprop (as being reasonably priced, and apparently simple-ish to fit). Has anyone got any recommendations re: feathering or folding prop types, or any sage advice about the perils of fitting one? Thanks. more>>

I'm changing Sarico's stern gland for a drip less type this winter, and whilst the prop shaft is off I will be changing the P bracket bearing. By the look of it I remove a grub screw and then drift the bearing out. However I'm worried about damaging the P bracket itself. Has anyone got any experi.. more>>

We have a Delta anchor, which up until now we thought to be very good, but have since read that a fortress anchor is much better. What anchors do members use and what would they reccommend? more>>